Step 1
1) Insert PVC hose on wall, in order that install faucet body and the signal line.
2) Put the signal line and water inlet hose inside the PVC hose.
3) Screw fixed joint and nut of faucet on tightly, then close the cover.
Step 4
1) Water outlet, hose connect, connect the faucet body with control box by flexible hose, screw the pipe buckle tightly.
2) Water inlet, hose connect, connect 4" water supply hose with water inlet.
Note: Be sure no water leakage after connecting water.
connect the signal line with the control box, then screw tightly.
Step 5
1) Put the control box on the wall, drill four holes, then insert the plastic bulged tube.
2) Fix the control box on wall by screw.
Note:
1) Please close the water supply and power supply before install.
2) Be sure to install the control box correct, don't put upside down.
3) For easy to maintain, should choose a suitable place to install the control box.
Meanwhile, it must less than 19.6inches(50cm) distant from the basin(Please check the above picture).The installation drawing of the control box.
