How to install Fontana Livorno Recessed Rainfall LED Shower System | FS971RWM

		Visit Product Page
Installation Instructions for Bathroom Shower Set Before you begin, please read the installation instructions below. Observe all local building and safety codes. Unpack and inspect the product for any shipping damages. If you find damages, do not install. Please note all products must be installed by a professional and certified plumber otherwise warranty might be voided.	shower

Shower Head Installation Instructions

Step 1:	shower	Step 2:
Step 3:		Step 4:
Step 5:		Step 6:

Step 8: (LED Control Box)		Step 9:

Shower Hand Held Shower Installation Instructions

Step 1:		Step 2:
	Hand Held Shower		Hand Held Shower
Handheld Shower
Step 3:		Size:
Handheld Shower
Holder Size

Hand Shower Outlet Installation • Complete the outlet pipework ensuring it ends in an appropriate 15mm x 1/2" BSP female thread elbow. Note: This fitting is not supplied as variations in installations require the selection of a suitable solder or compression fitting. • Install the 'Wall Outlet', thread long male 1/2" BSP into the appropriate female fitting using PTFE tape to give a watertight joint. Note: The thread can be cut to size if required. Make sure that all debris is removed from the connector and the section that has been cut is dressed correctly, before installation. The minimum required water pressure is 0.05 MPa (0.5 bar). Flow rate 2.5 GPM (9.5 LPM).

Shower Thermostatic Mixer Installation Instructions

Step 1:			Step 2:
	Mixer	Valve
Mixer Control Valve Installation Instructions
Step 3:			Step 4:
Mixer Control Valve Installation Instruction
Step 5:			Step 6:
Mixer Control Valve Installation Instruction
Step 7:

- Release Six handwheel levers according to the above directions. - Take apart the embed valve, panel, and handwheel. - Dig the embed space for the pipe on the wall according to the specification of the valve. - Dig 4 holes according to the position of the screws. - Use a hammer to thwack the screws into 4 holes. - Fix the valve body with 4 screws. - Find out the expansion screw heads with washer and spring washer. Use copper sleeve wrench to lock the screw heads with the embed valve body. - After connecting all the pipes and before sealing the wall with concrete, confirm no leaking problem occur when you turn on the water. - Fix the decorative panel on the embedded valve body. - Screw the handwheel arms with the handwheels.

---

Fontana Livorno Recessed Rainfall LED Shower System

When it comes to new bathroom upgrades, FontanaShowers is offering shape, finishes and styles that you've looking for. Give your bathroom an elegant look with our shower sets and fixtures. This is one of the trendiest finishes across decor styles in the bathroom. The recessed shower head features LED lighting, adding extra excitement to your shower. The shower head is multifunction, featuring rainfall, curtain and stream functions. This has an elegant design and elevates the appeal of your decor made from the highest quality and for great tastes. It comes super seal technology inside, capable of delivering superior performance with a solid construction for strong durability that will upgrade your bathroom with a modern and cool look for a long period of time.

Features:

Brand Name: FontanaShowers Model Number: FS971RWM Type: Shower Set Material: Stainless Steel Surface Finish: Chrome Mixer Included: Yes Shower Mixer Feature: Thermostatic 5 function mixer Shower Head Size: 27" x 15" Shower Head Functions: waterfall, rainfall, mist, water column mode. Voltage: 90-250v Water Flow: 2.6 - 18.5 gallons/min(10-70L/min) Water Pressure: 0.25-0.5mpa Thread: 1/2" NPT