1. Remove the mounting nut (A) and rubber washer (B) from the threaded pipe (C).
2. Fit the O-ring (D) into the groove of the faucet body. Screw the threaded pipe (C) to the faucet body. Screw the waterlines (E) into the corresponding screw-hole of the faucet body.
3. Insert waterlines (E) and threaded pipe (C) into the hole countertop.
4. Install rubber washer (B) onto the threaded pipe (C). Adjust the faucet body correctly and secure with mounting nut (A) tightly.
5. Connect waterlines (E) to angle stops. Turn on the to angle stops and check for leaks (Do not Turn Faucet On)
|