Fontana Sierra Round Ceiling Mount Ultra thin Bathroom Shower Head Set
This Fontana concealed thermostatic mixer valve shower set is a perfect addition to any bathroom. The thermostatic mixer valve gives you complete temperature control with a built-in anti-scalding device, so you'll never have to worry about a drop in temperature again. Chrome plated solid brass construction Built-in anti-scald device set to 100.4°F (38° Celcius). Easy clean anti-limescale rubber jets Minimum wall depth of 3.42" (87mm) required Minimum 1.0 bar water pressure.
Fontana Sierra Round Ceiling Mount Ultra thin Bathroom Shower Head Set Features:
Brand Name: FontanaShowers
Model Number: FS3361BS
Type: Bath & Shower Set
Style: Contemporary
Number of Handle: Dual Handle
Type: Fixed Rotatable Type
Surface Finish: Chrome
Feature: Thermostatic Faucets
Cold/Hot Water Control Type: Dual Holder Dual Control
Before you begin, please read the installation instructions below. Observe all local building and safety codes.
Unpack and inspect the product for any shipping damages. If you find damages, do not install.
Please note all showers must be installed by a professional and certified plumber otherwise warranty might be voided
Shower Head Installation Instructions
1. Ceiling arm mounting plate 2. Olive 3. Locking nut 4. Ceiling trim 5. Ceiling arm 6. Emily fixed showerhead 7. Fixing screws and wall plugs (not shown)
shower
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
1. Open the closed cover of the shower holder and take out the screws.
2. Drill two holes size 6mm on the wall according to the hole position of the shower holder. Use a hammer to break 2 plastic wall plug into two holes. Tighten the screws with the plastic wall plug and locking with the shower holder. Then install the closed cover.
3. Connect the shower hose with the water outlet connection part and hand shower. Plug the hand shower in the shower holder.
The installations & illustrations for Fontana Sierra Round Ceiling Mount Shower Set are for informational purposes only.